I’m just loving fringe and tassels lately — they are everywhere this season.  Most recently I added them to this Camo and Leather Clutch I created.  So, I thought….why not kick it up a notch and add a punch of color — and my fun red tassel earrings were born. Enjoy!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SUPPLIES: colorful basic tassel, e6000 glue, decorative end caps, straight pin, earring hooks, and scissors.

How-To:
1. Remove two strings that are holding tassel together.
2. Line up individual strings over your finger — I used 60 per earring.
3. Take another string and wrap it around your group of 60 strings.
4. Double knot this string tight.
5. Take your decorative end cap and slip onto the string you just double knotted.
6. Add a small amount of glue to the very opening of your end cap.  (Note: You just want enough glue to hold them in there, but you’ll want to be careful, because you don’t want excess glue seeping out on your exposed strings).
7. Gently slide the end cap down about a 1/4 inch onto the strings, just until they neatly gather together. Let this dry about an hour.
8. Slide earring hook onto one of the strings hanging out of the end cap.
9. Double knot the two strings to secure the earring hook.
10. Add a dab of glue to the knot you just created, for added stability.
11. Once this glue has dried, snip the excess string above your knot.
12. Trim the bottom of your earring to make it all neat and even.  Ta-da!